Description:
Generac propane standby generator rated up to 28 kW
- Provide and install one 250-gallon propane tank.
- Install the propane tank above ground or underground, depending on the selected configuration, property conditions, and applicable code requirements.
- Trench and install up to 50 feet of underground propane gas line from the tank to the generator.
- Connect the propane supply line to the generator.
- Install the generator and automatic transfer switch within approximately 10 feet of the home’s electrical service connection.
- Complete the required electrical connections using a licensed electrician.
- Obtain the required gas permit and coordinate applicable inspections.
- Test the installed system for proper operation.
LIMITATIONS AND CONDITIONS
- The generator is limited to a maximum rated capacity of 28 kW.
- The included propane tank is limited to one 250-gallon tank.
- The quoted gas-line installation is limited to 50 feet.
- The generator and transfer switch must be located within approximately 10 feet of the home’s electrical service connection.
- Propane tank placement is subject to applicable code requirements, required setbacks, manufacturer requirements, site access, and property conditions.
- Pricing assumes standard trenching, excavation, access, soil, and installation conditions.
- Rock, groundwater, concrete, paving, landscaping, buried obstructions, limited access, or other unusual site conditions may result in additional charges.
- Additional gas-line length, electrical work, materials, equipment, permits, tank-related work, or code-required upgrades beyond the stated scope are not included.
- Propane fuel is not included unless specifically stated in writing.
- Final equipment and tank placement are subject to manufacturer requirements, property setbacks, permitting requirements, and applicable codes.
- Final pricing and eligibility are subject to an on-site evaluation of the property.
- Any work outside this written scope requires approval and may be quoted separately.